SCANNING WITH THE TWAIN INTERFACE FROM PAPERPORT 89

The Folders pane (which shows folders for organizing your scanned images) is replaced by the Scan pane.

Scan pane.

Click the arrow to see the list of scanners.

If this Scan button is not active, see the section on page 97 to set up your scanner to work with PaperPort.

3.Click the Scanner drop-down arrow, and select TWAIN: Visioneer Strobe XP 450 from the drop-down list.

Note: Please wait a few moments for your selection from the drop- down list to become active. This delay only occurs the first time you select from the list while PaperPort initializes the scanner. Later on, selecting from the list activates immediately.

Note: If the Scan button at the bottom of the panel is not available when you make a selection from the Scanner drop-down list, then PaperPort needs to be setup to work with your scanner. See the section “Setting Up PaperPort to Work With Your Scanner” on page 97.

Page 94
Image 94
Visioneer XP 450 manual Scan pane