Visioneer XP 450 manual Install The Software, To install the software

STEP 3: INSTALL THE SOFTWARE 7

2. Plug the power cord into the power supply and into a wall outlet.

3.Turn on the power switch, located on the back of the scanner to the left of the power port.

The status light comes on and flashes indicating that the scanner is receiving power.

STEP 3: INSTALL THE SOFTWARE

Note: You must install the software before connecting the scanner to your computer. Otherwise, the correct driver software for your scanner will not be installed and it may not work properly.

To install the software:

1.Start Microsoft Windows and make sure no other applications are running.

2.Insert the CD into your computer’s CD-ROM drive.

The CD automatically starts.