VIVOTEK

Shown on the right is the connection diagram for Digital inputs and outputs.

12V

Power+12V

PIN 16

Digital output

+12V

PIN 12

Digital input

PIN 20

Ground

Network Deployment

Setting up the Network Camera over the Internet

There are several ways to set up the Network Camera over the Internet. The first way is to set up the Network Camera behind a router. The second way is to utilize a static IP. The third way is to use PPPoE.

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below.

1.Connect your Network Camera behind a router, the Internet environment is illustrated below. Regarding how to obtain your IP address, please refer to Software Installation on page 12 for details.

Internet

WAN (Wide Area Network )

IP address : 192.168.0.3

Subnet mask : 255.255.255.0

Router IP address : from ISP

Default router : 192.168.0.1

 

LAN (Local Area Network)

 

Router IP address : 192.168.0.1

 

Cable or DSL Modem

IP address : 192.168.0.2

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

10 - User's Manual

Page 10
Image 10
Vivotek SD8111 manual Network Deployment, Setting up the Network Camera over the Internet