VIVOTEK
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via the control panel and how to preset locations.
Preset Locations
On this page, you can preset positions for the Network Camera to go to directly or patrol. A total of 128 preset positions can be configured.
Please follow the steps below to preset a position:
1.Adjust the shooting area to a desired position using the buttons on the right side of the window.
2.Click Set Current Position as home or Restore Home Position to Default to define your home position.
3.Enter a name for the preset location, which allows for up to 40 characters. Click Add to enable the settings. The preset locations will be displayed under the Preset Location list on the
4.To add additional preset positions, please repeat step 1~3.
5. To remove a preset position from the list, select it from the list and click . Click | or | to unfold or | ||||
fold the list. |
|
| ||||
6. Click Save to enable the settings. |
|
| ||||
| 2010/05/06 13:44:17 |
|
|
|
|
|
|
|
|
|
|
|
|
1
Functions are the same as the Control Panel on the home page.
2
3
5
6
User's Manual - 67
