30
UTILITY
ESC/BACK
MEMORY
INPUT SELECT
1 – 8
Normal operation mode
Setting menu screen
SELECT INPUT CH
Input channel selection
PARAMETER
IN1– _______
Input channel name setting (p. 31)
Input channel name setting
Priority setting (p. 32)
IN1– DUCKER
O
FF
Ducker ON/OFF setting (p. 32)
(For the channel on which the D-001T is used)
PREPA
G
ET
O
NE–
O
FF
Pre-paging tone ON/OFF setting (p. 31)
Output format setting (p. 32)
Operation mode setting (p. 32)
IN1– PHANT
O
M
–
O
FF
Phantom power ON/OFF setting (p. 31)
IN1– SENSITIVITY– 10
Input sensitivity setting (p. 31)
IN1– V
O
X –
O
FF
VOX ON/OFF setting (p. 31)
(For the channel on which the ZP-001T is used)
O
UT=
O
UTPU
T
S
E
LECT
M
O
DE
=
PA
G
IN
G
P
O
RT
Press for over 2 seconds.
IN1 PRI
O
RI
T
Y8
I NPUT– SETT I N
G
Note
Set the priority level higher than level 8 for
the input channel to be used for broadcast
(e.g. paging using the ZP-001T) that
overrides BGM broadcasts.
12.4.1. Setting flow chart
The screen display examples shown below may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents to be selected with the Parameter setting knob, input channel selection key or other designated keys.
The indications of the [ ], [ ], [ ], and [ ] arrows represent that the screen is switched with the Screen shift key.