37
Trigger setting (when Event classification is set to BASE)
EVENT01TRI
G
C- IN01
Set how to activate the selected Event.
•C-IN01 to C-IN04 (C-IN01 to C-IN12 when the C-001T module is used):
Closing the designated control input terminal activates the Event. The control input terminals that
have already been set cannot be set.
•NONE: External control cannot be used for activation.
EVENT01 BASE 02 EVENT01 BASE 0 2
ENTER
Event number Confirmation indicator
BGM Event number selection (when Event classification is set to BASE)
Rotating the Parameter setting knob displays only the priority-8 inputs with the trigger function set to NONE
(normally BGM broadcasts) out of the Event numbers with Event classification set to ROUTE.
When the Enter key is pressed for confirmation, an asterisk [ ] is displayed on the right of the confirmed
number.
Up to 4 Event numbers can be set by repeating above-mentioned operations.
If the number of confirmed Event numbers exceeds 4, each number is erased in chronological order.
NONE, C-IN01 – 04, C-IN01 – 12 when C-001T is used (default: C-IN01)Setting Range
01 – 32 (default: 01)Setting Range