•Select the output channel using the Output channel selection key. The name of selected output channel is
displayed on the screen. Then confirm the selection by setting the Output channel ON/OFF key to ON (the
output channel indicator, red dot on the VFD screen lights).
•Repeat above operations to set multiple outputs.
35
EVENT01 IN1
Input channel name
Input channel setting (when Event classification is set to ROUTE)
Set the input channel using the Input channel selection key.
The name of the set input channel is displayed on the screen.
One input channel can be set per Event.
EVENT01 N
O
NE
Event number selection
Event number
EVENT01 N
O
NE
Event classification setting
Event classification
• NONE: Invalidates the selected Event.
• ROUTE: Sets broadcast patterns consisting of input/output, trigger, and other settings.
• BGM END: Used to perform settings for terminating all Events to which inputs with priority 8 are assigned.
• BASE: Groups broadcast patters which have been set to "Priority 8 Input with Trigger set to NONE " in
Classification ROUTE, so that they may be activated with a single trigger. This classification is
normally used to set the Event of BGM broadcasts.
Note: Screens that appear when the Up or Down shift key is pressed differ depending on the Event
classification settings.
12.6.2. Event setting items
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
01 – 32 (default: 01)
Setting Range
NONE (default), ROUTE, BGM END, BASESetting Range
IN1 – 8 (default: IN1)Setting Range
OUT1 – 2, Max. 8 when T-001Ts are added (default: OUT1)
Note: 2 or more channels selectable.
Setting Range
EVENT01
O
UT1
Output channel setting (when Event classification is set to ROUTE)
Output channel name