Set how much the input signal for the channel given lower priority than that of the currently set input channel
should be attenuated.
The minus figures in dB represent amount to attenuate input signals. The larger the minus figures, the larger
the amount of attenuation. Selecting "OFF" sets the attenuation to infinity, while selecting "0" sets to no
attenuation, permitting all input signals to be mixed and output.
51
• 4 (Speech leveler)
Makes paging calls easier to hear by equalizing the difference in speech signal volume that may result from
individual differences in speaker voice volumes or variations in speaker-to-microphone distances.
Since the volume is extensively corrected, the feedback margin narrows, making it liable to occurrences of
feedback. Therefore, special care must be taken when installing microphones and speakers.
This level is suited to microphone speech applications.
• 5 (Speech leveler)
Makes paging calls easier to hear by equalizing the difference in speech signal volume that may result from
individual differences in speaker voice volumes or variations in speaker-to-microphone distances.
This level 5 is more effective than level 4 described above. Since the volume is extensively corrected, the
feedback margin narrows, making it liable to occurrences of feedback. Therefore, special care must be taken
when installing microphones and speakers.
This level is suited to microphone speech applications.
V
O
X SENSITIV
I
TY– 30
VOX (Voice Operated Exchange) setting
Set the input signal level necessary for enabling the VOX function.
–40, –35, –30 (default), –25, –20, –15, –10, –5 dB
Setting Range
OFF, –50, –40, –30, –20 (default), –10, 0 dBSetting Range
DUCKER DEPTH – 20
Ducker attenuation level setting
.
:
O
UT1–
O
UT1
O
N00
.
:
Output gain
Output channel Output ON/OFF
Output channel selection and Output gain settings
Select with the output channel selection key the output channel to be adjusted.
Adjust the sound volume with the output volume control.
To stop the sound output temporarily, press the output channel ON/OFF key.
The output channel, even when set to OFF here, automatically turns ON when the unit returns to the normal
operation state.
You can adjust for two or more output channels by switching to each channel.
You can also adjust the output channel that the Event does not include.
OUT1 – 2, Max. 8 when three T-001Ts are used
(default: OUT1)
ON (default), OFF
–∞, –70.0 dB to +10.0 dB (default: –20.0 dB), 0.5 dB steps
Setting Range
Output Channel Selection
Channel Control
Channel Gain