Rotate the Parameter setting knob to set the loudness compensation function ON/OFF.
Setting ON boosts low frequencies.
49
12.8.3. Adjustment mode setting items
EVENT01– R
O
UTE
O
N
FAULT KEYLOCK
EMERGENCY
12345678 1234
5678
Event No. Output channels set in Event setting
Input channel set in Event setting
Event activation ON/OFF
Event selection
Rotate the Parameter setting knob to obtain the Event No. of which settings are desired to be adjusted.
The ON or OFF indication shows the corresponding Event activation status when the unit enters the
Adjustment mode.
To adjust the Event's setting, turn the Event activation ON using the input channel ON/OFF key.
Select the Event here and press the Right shift key to make the Event-related adjustments.
You cannot activate the selected Event if the assigned input channel is off.
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
–12 dB to +12 dB (default: 0 dB) 1 dB step
Setting Range
ON, OFF (default)Setting Range
IN1– IN1
O
N+100
.
:
Input gain
Input ON/OFF
Input gain settings
Adjust the input gain with the input volume control.
To stop the sound output temporarily, press the input channel ON/OFF key.
The input channel, even when set to OFF here, automatically turns ON when the unit returns to the normal
operation state.
For an input channel that the selected Event does not include, you can select it and make adjustments.
1 – 8 (default: 1)
ON (default), OFF
–∞, –70.0 dB to +10.0 dB (default: 0.0 dB), 0.5 dB steps
Setting Range
Input Channel Selection
Channel Control
Channel Gain
BASS+12 TREBLE– 10
BASS and TREBLE settings (input/output)
Rotate the Parameter setting knob to set gains.
Press the Right or Left shift key to select BASS or TREBLE, of which gain value that flashes can be adjusted.
L
O
UDNESS–
O
N
Loudness compensation setting (input/output)