Important
Be sure to disconnect the power supply plug from the AC outlet when changing the mode.
Since the changes in mode will erase all setting contents, download the set files that need to be stored using
the supplied PC software.
5.1. General Description
Use the matrix mode when broadcasting BGM or paging calls to zoned areas in such facilities as civic centers,
universities, schools, restaurants, bars, and cruise ships.
Input signals are basically not mixed but distributed in the matrix mode. Multiple audio input signals can be
simultaneously routed to multiple outputs and in addition, paging calls assigned different priority levels can be
initiated during BGM broadcast to each zone.
The ducker function (refer to the next page) also allows paging calls to be made without interrupting BGM
broadcasts to each zone.
A maximum of 32 settings related to broadcasts, such as broadcast sound source input channels, interrupt
broadcast output channels, BGM source input channels, and broadcast start methods, can be stored as Event
memory.
[Application example for a civic center]
9
5. DESCRIPTION OF MATRIX MODE Two operation modes are made available to the unit: Matrix mode and Mixer mode.
Be sure to select the matrix mode by the Mode switch on the rear panel before using the unit.
(The mode switch is factory-preset to the matrix mode.)
This manual describes the instructions on the unit set for the Matrix mode. When you use the unit
in the Mixer mode, please read the separate instruction manual for the mixer mode.
MODE
MIXERMATRIX
Mode switch
Room 1
TelephoneCD
1F corridors
Room 1
2F corridors Rest rooms
Room 3 Entrance hall
9000 series system