Vizio L30 WGUe manual Key Remote Control Functions, Lcd Tv

VIZIO L30 WGUe User Guide

1.10.1 - Key Remote Control Functions

1.SETUP – This button starts all programming sequences.

2.Remote LED – Blinks when the remote is being programmed or is sending a signal to your LCD display.

3.POWER – Press this key to turn the LCD display on from standby mode. Press it again to return to the standby mode.

4.AUX – This button selects a programmed component.

5.CBL – This button selects a programmed cable TV set-top box or selects a programmed satellite TV set-top box.

6.VCR – This button selects a programmed VCR.

7.TV – This button selects a programmed TV. Pre-programmed for the VIZIO L30 WGUe

LCD TV.

8.Number Button Pad – These buttons select a channel or password.

9.MUTE – This button turns the sound on and off.

10.100/Enter – This button enters a channel number greater than 100 in TV mode. Additionally, it works as an ENTER button in other video modes.

11.VOL (+ or -) – These buttons turn volume up or down.

12.LAST – This button recalls the previously viewed channel.

13.INPUT – This button changes the input source.

14.CH (+ or -) – These buttons change the channels up or down.

15.WIDE/GUIDE – This button cycles through standard and widescreen viewing modes or accesses programming guides, such as the one that comes with a satellite dish. GUIDE does not work in TV mode.

16.FAV/EXIT – This button exits the component, guide or OSD menus. Note: The FAV feature is not available on the L30 WGUe.

dcfe - These buttons navigate the on-screen display (OSD) menus.

17.SELECT – This button works to select your chosen options in on-screen display (OSD) menus.

18.INFO – This button turns the image and system information display on or off.

19.MENU – This button is used to turn the OSD on or off.

Version - 4/7/2005 10