VIZIO L30 WGUe User Guide
3.3 - Preparing the LCD for Wall Mounting
The VIZIO L30 WGUe can either be kept on the base stand or mounted to the wall for viewing. If you choose to mount the L30 WGUe to the wall, please follow the instructions below for removing the base stand.
To remove the stand base:
1.Unplug all the cables and cords from the LCD TV.
2.Place the LCD TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the display.
3.Remove the 6 screws on the stand base of the LCD TV.
Note: Please make sure you secure the base of the stand so that the glass does not fall when the screws are loosened.
4. Remove the glass and stand safely from the back panel.
Now, the LCD TV will fit flush against a LCD TV wall mount. Please make sure to read the directions of your specific wall mount to properly hang the L30 WGUe.
3.4 - Adjusting Basic LCD TV Settings
Volume
To increase the volume, press and hold the VOL + button on the front panel or remote control until the desired level is reached.
To decrease the volume, press and hold the - VOL button on the front panel or remote control until the desired level is reached.
TV Channels
To step up through the available TV channels, press the CH + button on the front panel or remote control once for the next channel or hold it depressed until the desired channel is reached.
To step down through the available TV channels, press the - CH button on the front panel or remote control once for the previous channel or hold it depressed until the desired channel is reached.
Wide
Using this feature you can watch video content in Panoramic, Widescreen, Zoom or Standard mode. Press the WIDE button on the remote control to switch among the modes.
Version - 4/7/2005 | 23 |
