VTech 20-2432 owner manual Enter Base ID Code

Registration and Operation

Enter Base ID Code

1.After charging the Handset, remove it from its Charge Cradle; the screen will

display:

alternating with this screen:

2.If, after charging the Handset, you see:

3.Press NEW. You will now see the

ENTER BASE ID screen as described in step 1.

4.Find the BASE ID Code by doing the following:(theBasemustbeinidle(OFF) mode)

A.At the Base, press MENU

B.Scroll down to DISPLAY BASE-ID

C.PressOK. TheBasescreenwilldisplay the 15-digit IDCode. Afterwards, it will return the idle screen.

5.Enter the 15-digit Base ID Code into the Handset; then press OK.

6.Wait approximately 15 to 60 seconds. You will hear confirmation beeps from the Base andHandset.ThenewlyregisteredHandset will now assign itself the lowest handset number not previously assigned to a

different system Handset (1 through 8).

7.If the Handset displays REJECTED BY BASE or continues to display SEARCHING FOR BASE for well beyond 60 seconds, try the registration process again by repeating the above steps.

Congratulations! You can now enjoy the benefits of your 2-Line Multi- Handset system.

Getting Started

13