Handset and Base Settings
SAVE TO MEMORY
To save a displayed Caller ID record into the directory, press MENU. Scroll to SAVE TO MEM 7. Press OK.
With the CID record displayed, press 7. The record has been stored in the directory.
If the record you wish to save does not have a name (OUT OF AREA, for example), the screen will ask you to PLEASE ENTER A NEW NAME. Use the keypad to enter the name, then press SAVE. A guide to the letters and characters can be found in the section entitled Memory.
RINGERS
NOTE: The Handset and Base ringers are adjusted separately. In addition, each line is adjusted separately.
Handset:
Press MENU, scroll to HANDSET
SETTINGS, then press OK.
RINGERS will be highlighted; press SET.
Highlight the desired adjustment, then press SET.
VOLUME : Use |
|
|
| to sample |
|
|
the choices of loudness. There are five:
OFF, LOW, MEDIUM, MEDIUM- HIGH and HIGH. Press OK to confirm your selection.
MELODY : Use 
to sample the six melodies. Press SAVE to confirm your selection.
Base Unit:
Press MENU, scroll to SETUP BASE, then press OK. Now follow the same procedure used for the Handset Ringers.
Basic Operation
19
