Handset and Base Indicators, Handset and Base Icons | VTech 20-2432

Basic Operation

Handset and Base Indicators

Handset and Base Icons

	Icon		Description
			Line In Use indicator
			On steady with no number next to it when a parallel set is
			in use.
1		2	On steady with one or more numbers next to it, indicating
			which extensions are using the line. For example, 1 02
			indicates that Base (0) and Handset 2 are on a call on Line
			1.
			Intercom indicator
			On steady with the extension numbers currently on an
			intercom call. For example, 02 indicates that the Base and
			Handset 2 are on an intercom call.
			Battery indicator (Only in Handset)
			Cycles (Low, Medium, and High) when Handset battery is
			charging.
			Flashes when a low battery condition is detected.

EEnhanced Mode indicator

On steady when active Handset or Base is in Enhanced mode.

	M	Mute indicator
	M	On steady when the Handset or Base microphone is muted.

	H	Hold indicator
	H	On steady when the line is on hold.

		Handset Registration indicator (Only in Handset)
		is displayed when a Handset is either not registered, is
		searching for a Base unit.

AC Power Failure indicator

POn steady when the AC power fails, the spare battery in the Base Unit is providing power backup.

14

Image 15

VTech 20-2432 owner manual Handset and Base Indicators, Handset and Base Icons

Contents

Qwest Customer Service 800 Important Safety Instructions Important Safety Instructions Menu Driven Displays Introduction Parts Check List Handset Layout Line Base Unit Layout Setup Installation of Battery Pack in Handset Charging Of Handset Battery Pack Charging Of Handset Battery Pack For Maximum Performance of Your Cordless Telephone System Dial ToneChecking for Dial Tone Tone/Pulse Selection Spare Battery Charger/Power Backup Function Registration And Operation Of The 20-2422 Accessory Handset Setup Of The 20-2422 Accessory HandsetRegistration and Operation Enter Base ID Code Handset and Base Icons Handset and Base Indicators LED Handset LEDsDescription Base LEDs RDL Redial Handset Settings RegisterSetup Base Display BASE-ID Soft Menu Functions Call History Caller ID Delete Shortcut Delete Save to Memory Handset and Base Settings Range Tone Handset only LOW Batt Tone Handset only Rename Enhanced Mode Handset and Base Settings Handset Deregistration Register Memory Memory To Store a Number/Name To Delete a Number/Name ToSearchForandDialaNumber Name To Edit a Number/Name Handset and Base Operation Making CallsRedial Answering Calls EraseSave Hold Function Mute Function Flash Function Base Speakerphone or Headset Volume Intercom/Transfer FunctionBase Handset Global Transferring Calls Handsfree Speakerphone OperationGlobal Call from Base Line in Use Indication Switching from the Handset Earpiece to HandsfreeLow Battery Indication Base Speakerphone Operation Message Waiting Indication Conference CallingLine Conference Calls Handset or Base Auto Callback 3-WAY Calling Repeat Dialing Custom Pay-Per-UsePPU Features CallWaiting Additional ServicesCaller ID Caller ID Blocking Options Call Trace Voice Messaging ServiceCallForwarding CallRejection To Use Speed Calling PriorityCallSelective Call Forwarding Speed Calling Headset Operation Headset Operation connected to the HandsetHeadset Operation connected to the Base Unit Maintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At All Common Cure For Electronic Equipment You Hear Other Calls While Using Your Phone Limited Warranty FCC Part FCC, Acta and IC Regulations Repair instructions FCC Part 68 and ActaProduct identifier and REN information Connection and use with the nationwide telephone network Programming/testing of emergency numbers Hearing aid compatibilityIC Industry Canada FCC, Acta and IC Regulations Nominal Effective Range Technical Specifications ISSUE0 Table Of Contents