VTech 20-2432 owner manual LOW Batt Tone Handset only, Range Tone Handset only

Models: 20-2432

1 51
Download 51 pages 39.3 Kb
Page 21
Image 21

Basic Operation

Handset and Base Settings

LOW BATT TONE (Handset only)

Select this option to turn the Low Battery warning tone On or Off. Press the OFF or ON soft keys, to make your selection. Press OK to confirm your selection and return to the Handset Settings menu. When set to ON, the Handset will emit a warning tone when a Low Battery condition is detected. This feature has been preset to ON at the factory.

RANGE TONE (Handset only)

Select this option to turn the Out of Range warning tone On or Off. Press the OFF or ON soft keys, to make your selection. Press OK to confirm your selection and return to the Handset Settings menu. When set to ON, the Handset will emit a warning tone whenever the Handset is taken out of range of the Base. This feature has been preset to ON at the factory.

KEYPAD TONE

Handset:

Select this option to turn the Keypad tones On or Off. Press the OFF or ON soft keys, to make your selection. Press OK to confirm your selection and return to the Handset Settings menu. When set to ON, the Handset will emit a beep whenever a key is pressed. This feature has been preset to ON at the factory.

Base Unit:

Press MENU, scroll to SETUP BASE, then press SET. Scroll to KEYPAD TONE; press OK. Choose ON or OFF, then press OK to confirm your choice.

CONTRAST

Handset:

Select this option to adjust the contrast level of the Handset display. Use

the

 

 

 

scroll keys to make your selection. The handset display

 

 

will

 

automatically adjust as you make your selection. PressOK to confirm

your selection and return to the Handset Settings menu.

Base Unit:

Press MENU, scroll to SETUP BASE, then press SET. Scroll to

CONTRAST; press OK. Press and to adjust the screen contrast, then press OK to confirm your choice.

SELECT TONE / PULSE AT THE BASE UNIT

·With the Base Unit in the idle (OFF) mode, press MENU.

·Scroll to SETUP BASE, then press OK.

·Scroll to SET PULSE/TONE, then press SET.

·Scroll to the desired line; press SET.

·Use the UP and DOWN arrow keys to highlight the desired dialing mode - TONE or PULSE. Press OK to confirm your choice.

NOTE: Your 20-2432 is preset for TONE dialing, the desired mode for most areas.

20

Page 21
Image 21
VTech 20-2432 owner manual LOW Batt Tone Handset only, Range Tone Handset only