VTech LS6425-2 End a PTT call, Answer an incoming call during a PTT call, Multiple handset use

Multiple handset use

End a PTT call

•For a one-to-one PTT call, both the originating and destination handsets can end the PTT call.

•For a PTT call to multiple handsets, the originating handset can end the PTT call. If any one of the destination handsets leaves the PTT call, the call continues until all handsets hang up.

To end or leave a PTT call:

•Press OFF/CANCEL or place the handset in the telephone base or charger. The handset displays Push to talk Ended.

After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.

Answer an incoming call during a PTT call

When you receive an incoming outside call during PTT, there is an alert tone.

•During a one-to-one PTT call, press /FLASH on the originating or destination handset. The PTT call ends automatically and the outside call is answered.

•During a PTT call to multiple handsets, press /FLASH on the originating handset. The PTT call ends automatically and the outside call is answered.

•During a PTT call to multiple handsets, press /FLASH on any one of the destination handsets and that handset answers the outside call. The PTT call continues for the rest of the PTT participants.

•To leave the PTT call without answering the incoming call, press OFF/CANCEL. The telephone continues to ring.

Make an outgoing call during a PTT call

•During a one-to-one PTT call, press /FLASH to get a dial tone. The PTT call ends automatically.

•During a PTT call to multiple handsets, press /FLASH on the originating handset. The PTT call ends automatically and you get a dial tone.

•During a PTT call to multiple handsets, press /FLASH on any one of the destination handsets and that handset gets a dial tone. The PTT call continues for the rest of the PTT participants.

31