Answering system settings
Message alert tone
The telephone base beeps every 10 seconds to alert you of new messages. The tone stops when all new messages have been reviewed.
1.Press MENU/SELECT when the handset is not in use.
2.Press 
or 
to highlight >Answering sys, then press
MENU/SELECT.
3.Press 
or 
to highlight >Ans sys setup, then press
MENU/SELECT.
4.Press 
or 
to highlight >Msg alert tone, then press
MENU/SELECT.
5.Press 
or 
to choose >On or >Off, then press MENU/SELECT to save.
Remote code >Msg alert tone
MSG ALERT TONE >On
•The answering system must be turned on for the message alert tone to function.
•Press any key on the telephone base (except 
/FIND HANDSET) to temporarily silence the message alert tone.
Message recording time
You can set the recording time allowed for incoming messages. The message length is three minutes by default.
1.Press MENU/SELECT when the handset is not in use.
2.Press 
or 
to highlight >Answering sys, then press
MENU/SELECT.
3.Press 
or 
to highlight >Ans sys setup, then press
MENU/SELECT.
4.Press 
or 
to highlight >Recording time, then press
MENU/SELECT.
5.Press 
or 
to choose >3 minutes, >2 minutes, or >1 minute, then press MENU/SELECT to save.
Msg alert tone >Recording time
RECORDING TIME >3 minutes
47
