VTech LS6425-3 Number of rings, Remote access code, Answering system settings, Menu/Select

Answering system settings

Number of rings

You can choose from two, three, four, five, six rings or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after four rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area.

1.Press MENU/SELECT when the handset is not in use.

2.Press or to highlight >Answering sys, then press

MENU/SELECT.

3.Press or to highlight >Ans sys setup, then press

MENU/SELECT.

4.Press or to highlight ># of rings, then press

MENU/SELECT.

5.Press or to choose 6, 5, 4, 3, 2 or Toll saver, then press MENU/SELECT to save.

Call screening ># of rings

#of rings

>3

Remote access code

A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.

1.	Press MENU/SELECT when the handset is not in use.
2.	Press	or	to highlight >Answering sys, then press	# of rings
				>Remote code
	MENU/SELECT.
3.	Press	or	to highlight >Ans sys setup, then press
	MENU/SELECT.
				REMOTE CODE
4.	Press	or	to highlight >Remote code, then press
				19
	MENU/SELECT.

5.Use the dialing keys (0-9) to enter a two-digit number, then press MENU/SELECT to save.

46