VTech LS6426-3, LS6425-4, LS6425-3, LS6426-4 PTT to multiple handsets, Multiple handset use

Multiple handset use

PTT to multiple handsets

When you have two to five registered handsets, PTT supports one-to-all calls (one-to-four maximum). However, when you have six or more registered handsets, PTT supports a maximum of one-to-three calls. The first four registered handsets will be able to use this feature. Other handsets can only use PTT for one-to-one calls.

1.To begin a PTT call to multiple handsets:

•Press and hold PUSH TO TALK when the handset is not in use.

•If you have more than two handsets, press PUSH TO TALK when the handset is not in use. Press and #, or or to highlight >All handsets then press MENU/SELECT or PUSH TO TALK.

Your handset displays Connecting to all handsets... for a few seconds. When the connection is made, all handsets display Press and hold [PTT] to talk and beep once.

2.Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak towards the handset. Your voice is broadcast to all destination handsets.

While you are speaking, your handset displays PTT To handset: X (X represents the destination handset).

3.Release PUSH TO TALK after speaking. Both handsets beep once again. After the handsets beep, you can press and hold PUSH TO TALK to speak again or the destination handsets can respond (see Answer a PTT call on page 30).

4.Press OFF/CANCEL to end the PTT call. The handset displays Push to talk Ended for a few seconds.

-OR-

Place the handset in the telephone base or charger to end the PTT call.

After PUSH TO TALK is released, the PTT call session remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call session ends automatically.

29