Appendix | VTech LS6426-3, LS6425-4, LS6425-3, LS6426-4, LS6425-2

Appendix

	No battery	No battery is installed. Follow the directions for battery
		installation on page 3 to install the battery before charging.
	No line	There is no telephone line connected.

	No signal,	Communication between the handset and telephone base
	call ended	is lost during a call.
	Not available at	One handset is already viewing the caller ID log or
	this time	directory, and another handset attempts to review it.
		You attempt to place a PTT call to another handset which
		is on an outside call or intercom call, or accessing the
		answering system.
	Number already saved	The telephone number entered is already stored in the
		directory.
	Out of range OR	The handset cannot communicate with the telephone
	No pwr at base	base. Check the telephone base power connection or
		move closer.
	Paging	The system handset is being paged.

	Phone	The handset is on a call.

	Place in charger	The battery is very low. Place the handset in the
		telephone base or charger for recharging.
	Rec mem full	The answering system memory is full

	Rec mem low	The answering system has less than three minutes of
		recording time left.
	Ringer muted	The ringer is muted temporarily during an incoming or
		intercom call.
	Ringer off	The ringer is turned off.

	Saved	Your selection has been saved.

	Speaker	The handset speakerphone is in use.

	Unable to call.	You are attempting to predial a number while the
	Line in use	telephone line is in use.
	Unable to call.	You try to join a call when there are already four handsets
	Try again	on that call, or to make an outside call when another
	Try again	handset is transferring a call with the intercom feature.
		handset is transferring a call with the intercom feature.
	Unable to save	You are attempting to save a caller ID entry without a
		name and number into the directory.
	XX Missed calls	There are XX calls that have not been reviewed in your
		caller ID log.
	XX New messages	There are XX new messages in the answering system.

56

Image 60

VTech LS6426-3, LS6425-4, LS6425-3, LS6426-4, LS6425-2 Appendix, No battery is installed. Follow the directions for battery

Contents

User’s manual w w w.v t e c h p h o n e s . c o mModels LS6425/LS6425-2 LS6425-3/ LS6425-4 LS6426-3/LS6426-4 Congratulations Telephone settings Getting startedTelephone operation Multiple handset use Answering system settings Caller IDAnswering system operation Appendix Parts checklist Getting started Telephone installation Battery installation Battery charging displays Place in chargerHANDSET Installation options Tabletop to wall mount installation Wall mount to tabletop installation 4. See Telephone installation on page Telephone base layout IN USE lightFIND HANDSET REPEAT Handset layout VOLUME directory/volumeCHARGE light MUTE/DELETE CID//VOLUME caller ID/volume OFF/CANCELMENU/SELECT Dialing keys PUSH TO TALK PTT Press to begin a broadcast to one or multiple handsets pages 28 andPUSH TO TALK Telephone settings Using the menuTo enter the handset menu Ringer volume telephone base Ringer volume handsetMENU/SELECT 3. Press MENU/SELECT to select Ringer volume Ringer tone Set date and time LCD languageMENU/SELECT 3. Press MENU/SELECT to select LCD language Voice announce caller ID Clear voicemail indicators Rename handset Key tone CID time synchronization Home area code Dial mode Website Listening volume Telephone operationMake a call Predial a call Mute Temporary ringer silencingTemporary tone dialing Find handset Call waitingEqualizer Redial Review and dial a redial entry Delete a redial entryCopy a number from the redial list to the directory OR 1. Press /FLASH or /SPEAKER 2. Press REDIAL/PAUSE To access a number from the directory while on a call To access a number from the caller ID log while on a callTo access a number from the redial list while on a call Chain dialing Multiple handset use Join a call in progressIntercom To share an outside call Answer an incoming call during an intercom call Announced transfer Blind transfer press OFF/CANCEL on your handset PTT requires two handsets when you press PUSH TO TALK Push-to-talk PTTTurn PTT on or off PTT to a single handset PTT to multiple handsets Answer a PTT call Change a one-to-one PTT call to intercom call End a PTT call Answer an incoming call during a PTT callMake an outgoing call during a PTT call To end or leave a PTT call Directory About the directory Add a directory entry Answering sys Directory Review Add contact ENTER NUMBERENTER NAME Mike Smith Search the directory Alphabetical searchDial a directory entry Edit a directory entry Delete a directory entryMike Smith EDIT NUMBER EDIT NAME Mike Smith Saved Mike Smith Mike Smith Delete contact? Assign a directory entry to a speed dial location Dial a speed dial entryCopy from Directory Reassign a speed dial number Delete a speed dial entry5. Press MENU/SELECT to choose Change SD Caller ID About caller IDInformation about caller ID with call waiting Caller ID log Memory match Missed call indicator Review the caller ID logView dialing options Dial a caller ID log entry Save a caller ID log entry to the directorydisplays EDIT NUMBER Delete the caller ID log entries Caller ID log display screen messagesTo delete one entry To delete all entries Answering system settings Answering systemAnnouncement Record your own announcement Play your announcement Delete your announcement3. Press MENU/SELECT to highlight Announcement 4. Press MENU/SELECT to select Play annc Answer on/off Call screeningTo turn on or off with the telephone base To turn on or off with a handset Remote access code Number of rings Message alert tone Message recording time Using the answering system and voicemail together Answering system operationAnswering system and voicemail Message capacity New message indicationCall intercept Call screening at the telephone base Message playback To play messages with the telephone base To play messages with a handset Play new msgsPlay old msgs, then press MENU/SELECT it announces, “Less than three minutes to record.” Delete all old messages To delete all old messages with the telephone base“All old messages deleted.” To delete all old messages with a handset Record, play and delete memos Message window displaysTo record a memo Remote access 3. Then you can enter one of the following remote commandsCommand 1. Dial your telephone number from any touch-tone telephone Appendix Handset display screen messages No battery is installed. Follow the directions for battery Handset and telephone base indicators Handset lightsTelephone base lights ANS ON/OFF Battery Expand your telephone system Add and register a handsetTo register a handset To reset Deregister handsetsTo deregister all handsets Troubleshooting My telephone does not work at allThere is no dial tone I cannot dial out from my cordless handset Low battery shows on screen The telephone does not ring when there is an incoming callThe CHARGE light is off My handset beeps and is not performing normally I hear noise on the cordless handset and the keys do not work I hear other calls when using the cordless handset My caller ID features are not working properlyThe other party cannot hear my voice during a call Registration failed appears on the handset Caller ID entries do not match the numbers I need to dial Out of range OR No pwr at base shows in the handset screenNew voicemail and show on the display and I don’t know why I cannot retrieve voicemail messages The outgoing announcement is not clear The answering system does not record messagesThe messages on the answering system are very difficult to hear The messages on the answering system are incomplete The answering system does not respond to remote commands Common cure for electronic equipment Important safety instructions SAVE THESE INSTRUCTIONS Precautions for users of implanted cardiac pacemakers MaintenanceOperating range Cleaning your telephone About cordless telephones The RBRC seal FCC, ACTA and IC regulations FCC PartFCC Part 68 and ACTA Industry Canada Limited warranty What does this limited warranty cover?How long is the limited warranty period? What is not covered by this limited warranty? Please retain your original sales receipt as proof of purchase How do you get warranty service?What must you return with the Product to get warranty service? Other limitations Technical specifications Index Index