Chapter 1 General Information
© National Instruments Corporation 1-7 VXI-MXI User Manual
The following optional equipment is also available and may be necessary if your VXI-MXI
includes the INTX daughter card.
Equipment Part Number
Type INTX1 Cables
Straight-point connector to straight-point connector:
– 1 m 180980-01
– 2 m 180980-02
– 4 m 180980-04
– 8 m 180980-08
– 20 m 180980-20
Type INTX2 Cables
Right-angle point connector to right-angle daisy-chain connector:
– 1 m 180982-01
– 2 m 180982-02
– 4 m 180982-04
– 8 m 180982-08
– 20 m 180982-20
Unpacking
Follow these steps when unpacking your VXI-MXI:
1. Before attempting to configure or install the VXI-MXI, inspect the shipping container and its
contents for damage. If damage appears to have been caused in shipment, file a claim with
the carrier. Retain the packing material for possible inspection and/or for reshipment.
2. Verify that the pieces contained in the package you received match the kit parts list. Do not
remove the board from its bag at this point.
3. Your VXI-MXI module is shipped packaged in an antistatic plastic bag to prevent
electrostatic damage to the module. Several components on the module can be damaged by
electrostatic discharge. To avoid such damage while handling the module, touch the plastic
bag to a metal part of your grounded VXIbus mainframe chassis before removing the module
from the bag.
4. As you remove the VXI-MXI module from its bag, be sure to handle it only by its edges.
Avoid touching any of the IC components or connectors. Inspect the module for loose
components or any other sign of damage. Notify National Instruments if the module appears
damaged in any way. Do not install a damaged module into your VXIbus mainframe.