Wayne-Dalton 6100 installation instructions Stacking Sections, Top Roller Slides, Installation

12	Stacking Sections
Tools Needed:	NOTE: For door section identification see
	page 4.
Power Drill
	NOTE: Make sure hinges are flipped down,
7/16” Socket	when stacking another section on top.
Driver	NOTE: Larger doors will use long shaft
	rollers with double wide end hinges
	Place rollers in hinge tubes of the second
	section (lock section). With assistance, lift
	second section and guide rollers into the
	vertical tracks. Keep patterns on front of
	sections aligned, and fasten center hinges
	first and end hinges last with 1/4”-14 x
	5/8” self tapping screws. Repeat for other
	section(s) except top section.
	IMPORTANT: Push & hold the hinge
	leaf against section while securing
	with 1/4”-14 x 5/8” self tapping
	screws. End Hinges have (2) screws
	and Intermediate hinges have (3)
	screws; Double end hinges have (5)
	screws.
	NOTE: Lock(s) are required if door is not
	installed with opener. Install lock at this
	time (sold separately) see instructions in
	OPTIONAL INSTALLATION on page 32.

(5) 1/4”-14 X 5/8” SELF

TAPPING SCREWS

Double End hinges (left hand shown, right hinge symmetrically opposite)

(3) 1/4”-14 X 5/8” SELF

TAPPING SCREWS

(2) 1/4”-14 X 5/8”

SELFTA PPING SCREWS

End hinges (left hand shown, right	Intermediate hinges
hinge symmetrically opposite)

INSTALLATION

13	Top Roller Slides
Tools Needed:	To install the top roller slides, align
Power Drill	the slots in the top roller slide with the	3rd
7/16” Socket	second set of holes on the bottom of the	2nd
	U-bar.	1st
Driver
Step Ladder	Loosely, fasten using (2) 1/4” - 14 x 5/8”
	self tapping screws. The bracket will be
	tightened and adjusted in Step 18. Insert	top RIGHT SIDE
	rollers into top roller slide. Repeat for
	left side.

top roller slide

rOLLER

(2) 1/4”- 14 X 5/8”

SELF TAPPING

SCREWS

15

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com