Wayne-Dalton 6100 Tools Required, Removing An Existing Door, Pre-Installation

Tools Required

Power Drill	Ratchet Wrench	Pliers/Wire Cutters	Tape Measure	1/8”, 3/16” Drill Bits
Phillips Head Screwdriver	Flat Tip Screwdriver	Pencil	Needle Nose Pliers	Gloves
7/16”, 1/2”, 9/16”, 5/8”	7/16” Socket Driver	3/8”, 7/16”, 1/2”, 9/16”	Safety Glasses
Sockets		Wrenches
Hammer	vice grips	Vice clamps	(2) Saw Horses	Step Ladder

Removing An Existing Door

IMPORTANT: Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

WARNING

A powerful spring releasing its energy suddenly can cause severe or fatal injury. To avoid injury have a trained door systems technician, using proper tools and instructions, release the spring tension.

For detailed information see supplemental instructions “Removing an Existing Door /Preparing the Opening”. These instructions are available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. Hope, OH 44660, or at www.wayne-dalton.com.

5

PRE-INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com