|
|
| Winding Springs Continued... |
|
|
|
|
|
| wheel for winding or place a mark on | |
| Tools Needed: |
| |
|
|
| the winding shaft and end bracket. |
|
|
| |
|
|
| Place the ratchet with 5/8” socket onto |
|
|
| the left hand winding shaft end. To wind |
|
|
| the spring, rotate the winding shaft |
Back of torquemaster® plus end bracket warning tag
clockwise, while watching the black |
tooth on the ratchet wheel or the mark |
on the winding shaft. |
Rotate the winding shaft to the required |
number of turns for your door. Then |
return to the right hand side and wind |
the right hand spring to the required |
number of turns. Place pawl knob in |
lower position on both sides. |
IMPORTANT: Mark number of spring |
turns on TorqueMaster® Plus end |
bracket warning tag. |
NOTE: Since total turns to balance door |
can deviate from spring turn chart |
values by ± 1/2 turn, adjustments to the |
recommended number of turns may be |
required after rear hangers assembly |
is completed. |
IMPORTANT! Hold the door down |
to prevent it from rising |
unexpectedly in the event the |
spring was overwound and |
cautiously remove vICE cLAMPS |
from vertical tracks. |
Spring Turns
Door Height | Spring Turns |
(6’ - 0”) | 14 |
(6’ - 3”) | 14 - 1/2 |
(6’ - 5”) | 15 |
(6’ - 6”) | 15 |
(6’ - 8”) | 15 - 1/2 |
(6’ - 9”) | 15 - 1/2 |
(7’ - 0”) | 16 |
(7’ - 3”) | 16 - 1/2 |
(7’ - 6”) | 17 |
(7’ - 9”) | 17 - 1/2 |
(8’ - 0”) | 18 |
Number of Installed Spring Turns
Location for
marking number
of installed spring turns
27 | Drum Wrap Installation |
|
Tools Needed: Step Ladder
To install drum wraps, position the left hand drum wrap over the left hand drum, align with counterbalance cable; slide groove in drum wrap towards the left until tabs snap over drum between drum and ratchet gear. Repeat for right hand side.
drum wrap (left hand)
drum
(left hand)
tabs
groove in drum 
Counterbalance
cable
26
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at
