Wayne-Dalton 6100 installation instructions Trolley Operator, Optional INSTALLATION

�	Trolley Operator
Tools Needed:	WARNING

OPERATOR MUST BE TESTED AT TIME OF INSTALLATION AND MONTHLY THEREAFTER as described in your installation instructions and owner’s manual, TO ENSURE THAT DOOR safety features function. FAILURE TO TEST or make any necessary ADJUSTMENTS OR REPAIRS, CAN RESULT IN SEVERE OR FATAL INJURY

1.Install operator rail 1/2” to 1-1/2” (13 - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket installed in Step 14 with clevis and cotter pin.

4.Attach operator to a suitable mounting surface (2” x 6”) lumber minimum.

5.Attach operator to ceiling framing members.

IMPORTANT: Angles must be attached SECURELY to framing member(s).

OPERATOR RAIL

Suitable mounting

surface (2” x 6”) lumber minimum

Cotter pin

dOOR ARM

Clevis Pin

perforated

OPERATORangle rail

OPERATOR

FRAMING MEMBERS

PERFORATED ANGLE

Optional INSTALLATION

33

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com