9 | Adjustable Operator | |
Bracket Installation | ||
Tools Needed: | IMPORTANT! WHEN CONNECTING A TROLLEY | |
TYPE GARAGE DOOR OPENER TO THIS DOOR, A | ||
Power Drill | ||
| ||
7/16” Socket Driver | BE SECURELY ATTACHED TO THE TOP SECTION | |
7/16” Wrench | OF THE DOOR, ALONG WITH ANY | |
VIDED WITH THE DOOR. THE INSTALLATION OF THE | ||
| ||
| OPENER MUST BE ACCORDING TO MANUFACTURER’S | |
| INSTRUCTIONS AND FORCE SETTINGS MUST BE | |
| ADJUSTED PROPERLY. | |
| Place the top half of the operator bracket inside the | |
| bottom half and hold flush against the inside of the | |
| top section (as shown). Adjust the top / bottom halves | |
| out against the | |
| both halves together with (4) 1/4” - 20 x 5/8” car- | |
| riage bolts and nuts. | |
| Note: Install the track bolts as far apart as possible | |
| (as shown), when fastening the top / bottom halves | |
| together. | |
| NOTE: For retro fit applications, the adjustable | |
| operator bracket must be aligned with the existing | |
| operator. | |
| Locate the center of the top section and align the | |
| center of both end tabs of the adjustable opera- | |
| tor bracket with the sections center line; align the | |
| adjustable operator bracket vertically. | |
| To attach the adjustable operator bracket: | |
| Attach the operator bracket to the | |
| 1/4” - 20 x 11/16” self drilling screws and the bot- |
Center line of top section
Align center of both end tabs with center line of top section
Top section
Adjustable operator
bracket (Bottom half)
Bottom rib
Adjustable operator bracket
(Top half)
(4)1/4”
tom rib with (2) 1/4” |
(as shown). |
Now tighten all (4) previously installed carriage bolts |
and nuts. |
(2) 1/4”
Typical operator arm | Tighten all (4) carriage |
attachment | bolts and nuts |
(2) 1/4”
12
Bottom rib
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at