� | Side Lock | |
| ||
|
| |
Tools Needed: | Install the side lock on the second section of the door. | |
Secure the lock to the section with (4) | ||
Power Drill | ||
11/16” self drilling screws. Square the lock assembly | ||
| ||
7/16” Socket Driver | with the door section, and align with the square hole | |
Tape Measure | in the vertical track. The side lock should be spaced | |
approximately 1/8” from the section edge. | ||
| IMPORTANT: side locks must be removed or | |
| made inoperative in the unlocked position if | |
| an operator is installed on the door. | |
| NOTE: After completing this step, continue with Step | |
| 6 on page 10. |
(4) 1/4”- 20 X 11/16” self drilling screws
1/8”
� |
| Pull Rope | ||
|
| |||
|
|
|
| |
|
|
|
| |
Tools Needed: |
| WARNING | ||
|
|
| ||
Power Drill |
|
|
| |
DO NOT INSTALL PULL ROPES ON DOORS WITH | ||||
Drill Bit | ||||
ELECTRIC OPERATORS. CHILDREN MAY BECOME | ||||
| ENTANGLED IN THE ROPE CAUSING SEVERE OR FATAL | |||
| INJURY. | |||
| Pilot drill the location for the No. 6 screw eye. | |||
| Screw the No. 6 screw eye into the wood jamb | |||
| approximately 48” to 50” (1220 to 1270 mm) from | |||
| the floor. Tie the pull rope to the screw eye and to the | |||
| bottom bracket as shown. |
No. 6 screw eye
Pull rope
Pull rope
optional INSTALLATION
Bottom bracket
21
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at