Wayne-Dalton 6100 Package Contents, 5/16” X 1-1/4” Clevis, Center bracket

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. Rear supports may or may not be included with your door.

Stud plate (as required)

Door sections (as required)

Pull handles

(2) Horizontal Tracks with attached horizontal angle RH/LH

Asymmetrical u-bar	(1) Operator	(1) Torsion tube
	bracket
(as required)

Long and short stem rollers	End bearing bracket	Right and left torsion	Right and left hand	5/16” X 1-1/4” Clevis	(2) Vertical RH/LH
(as required)		springs (as required)	cable drums	pin & cotter pin	Tracks

Top bracket bases	Top bracket slides	Right and left	(1) Center bracket	Weather seal and nails	Lift handles
(as required)	(as required)	counterbalance cables	bushing	(If included)

#6 Screw eye and pull rope	(1) Center bracket	1/4”- 20 Flange hex nuts	3/8”- 16 Hex nuts	1/4”-14 X 5/8” Self tapping	#8 X 1 21/32” Quadrex pan
					head screw (As required)
(If included)		(as required)	(as required)	screw (as required)

1/4”-20 X 11/16” Self drilling	3/8”-16 X 3/4” Truss	1/4”-20 X 9/16” Track	1/4” - 20 X 5/8”	3/8”-16 X 1-1/2” Hex head bolts
	head bolts (as required)	bolts (as required)	Carriage bolts (as required)	(as required)
screws (as required)

5/16” X 1-5/8” Hex head lag screws	5/16” X 1-5/8” Tamper-resistant hex head lag	5/16” X 2” Tamper-resistant hex head lag
(as required)	screws (as required)	screws (as required)

3

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com