| Tools Required |
|
|
|
| |
Power drill | Pencil | Ratchet wrench | Vice grips | 3/8”, 7/16” Socket driver | Gloves | INSTALLATION |
|
|
|
|
|
| PRE- |
Phillips head screw- | 7/16”, 1/2” & 9/16” 9/32”, 1/2”, 3/16” & 1/8” Drill | Safety glasses | 1/4”, 3/8”, 7/16”, 1/2” & | Hammer |
| |
driver | Socket | bits |
| 9/16” Wrenches |
|
|
|
| Level | Tape measure | Vice clamps |
|
|
Sawhorse |
| Flat tip screwdriver | 1/4” Torx bit | Approved winding bars |
|
|
|
| Step ladder |
| |||
|
|
|
|
|
| |
P1 | Removing An Old Door |
|
|
|
| |
IMPORTANT: Counterbalance SPRING TENSION Must always BE Released BEfORE any attempt IS Made TO Start Removing an EXISTING DOOR.
WARNING
A Powerful SPRING Releasing ITS Energy Suddenly Can Cause Severe OR fatal Injury. TO avoid Injury have a Trained DOOR Systems Technician, using PROPER TOOLS and Instructions, Release The SPRING TENSION.
For detailed information see supplemental instructions “Removing an Existing Door /Preparing the Opening”. These instructions are available at no charge from Wayne- Dalton Corp., P.O. Box 67, Mt. hope, Oh 44660, or at
5
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at
