GAS INSTRUCTIONS
mWARNING: The gas connections of your Summit® gas grill
have been factory tested. We do however recommend that you leak check all gas connections before operating your Summit® gas grill.
Remove Control Panel
Parts required: Phillips screwdriver and a towel.. |
| |
A) | Remove the burner control knobs (1).. |
|
B) | Open both doors and place a towel on top of the doors.. This will protect the control |
|
| panel and tops of the doors from getting scratched on the next step.. |
|
C) | Remove the screws from the underside of the control panel with a Phillips | 1 |
| screwdriver (2).. | |
D)Tilt the conrol panel forward and lift up and away from the grill (3) (For Summit® models with LED features: Be careful not to break or disconnect the wires for the control panel LED’s)..
E)Place the control panel on the towel covering the door assemblies (4)..
2
The grill illustrated may have slight differences than the model purchased.
3
4
16
