GAS INSTRUCTIONS

REFILLING THE LIQUID PROPANE CYLINDER

We recommend that you refill the LP cylinder before it is completely empty..

Removal of the LP cylinder:

3

A)

Close cylinder valve (turn clockwise) (1)..

 

 

B)

Unscrew regulator coupling by turning counterclockwise, by hand only (2)..

 

 

 

 

C)

Loosen cylinder lock wing nut and turn cylinder lock up out of the way (3)..

 

 

D)

Lift cylinder off..

 

 

To fill, take the LP cylinder to a gas propane dealer, or look up “gas-propane” in the phone book for other sources of LP gas..

m WARNING: We recommend that your LP cylinder be filled at an authorized LP gas dealer, by a qualified attendant, who fills the cylinder by weight. IMPROPER FILLING IS DANGEROUS.

mCAUTION: Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

LIGHT FEATURES

WEBER® GRILL OUT™ HANDLE LIGHT

The Weber Grill Out™ Handle Light has a built-in “tilt sensor..” With the power button (1) activated, the light will come on when the grill lid is open.. The light will turn off when the lid is closed.. For daytime use, deactivate the sensor by pressing power button (1)..

LIGHTED CONTROL KNOBS

Your gas grill comes with control knobs that light up, allowing you to fine tune heat settings, even in low light conditions..

Requires three “D” alkaline batteries.. Do not mix old and new batteries or different types of batteries (standard, alkaline, or rechargeable).. Battery housing is located inside the cabinet on the left side..

To operate, activate power button..

2

1

1

www.weber.com® 19

Page 19
Image 19
Weber 56567 Light Features, Refilling the Liquid Propane Cylinder, Weber Grill OUT Handle Light, Lighted Control Knobs