SEAR STATION® IGNITION & USAGE
SEAR STATION® BURNER MANUAL IGNITION
mDANGER
Failure to open the lid while igniting the barbecue’s burners, or not waiting five minutes to allow the gas to clear if the barbecue does not light, may result in an explosive
The Sear Station® burner, has an on or off control setting.. To ignite the Sear Station® burner, you must first ignite the two adjacent main burners..
Adjacent Main Burner Snap Ignition
Note: Each main burner control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube.You generate the energy for the spark by pushing in the control knob and turning it to START/HI.This will ignite each individual burner.
A)Open the lid (1)..
B)Verify each main burner that is adjacent to the Sear Station® is lit by visual inspection of a flame (2)..
C)Put match in the matchstick holder and strike match..
mWARNING: Do not lean over open barbecue.
D)Insert matchstick holder and lit match down through cooking grates and Flavorizer® bars to ignite the Sear Station® burner (3)..
E)Push the Sear Station® control knob in and turn it to the ON position (4)..
mWARNING: If the burner does not light, turn the burner control knob to OFF and wait five minutes to let the gas clear before you try again.
Note: See “MAINTENANCE” for burner removal and cleaning procedure. ◆
TO EXTINGUISH
Push in and turn each burner control knob clockwise to OFF position.. Turn gas supply off at the source.. ◆
USING THE SEAR STATION®
Your Weber® gas barbecue includes a sear burner for searing meats such as steak, poultry parts, fish, and chops..
Searing is a direct grilling technique which browns the surface of the food at a high temperature.. By searing or browning both sides of the meat, you will create a more desirable flavor by caramelizing the food surface.. Searing will also enhance appearance of the meat with sear marks from the cooking grates.. This, along with the contrast of textures and flavors, can make food more interesting to the palate..
The Sear Station® burner has an on or off control setting that works with the two adjacent main burners.. With the sear and adjacent burners, you can effectively sear meats while using other cooking areas for grilling with moderate heat..
Before searing food, you should turn all of the main burners on HI for 15 minutes to preheat the grill.. Note: Always grill with the lid closed to allow for maximum heat and to avoid
Once the grill is preheated, turn the outer burners off or down to low.. Leave the center two burners on HI and ignite the Sear Station® burner..
Place the meat directly over the Sear Station®.. You will sear each side anywhere from one to four minutes, depending on the type and thickness of the meat.. You may turn the food a quarter turn to make crossing sear marks (1) before you sear the other side in the same manner..
Once you are done searing the meat, you can finish grilling it by moving it to a more moderate heat over the outside burners to achieve the desired doneness..
As you gain experience in using your Sear Station®, we encourage you to experiment with different searing times to find results that work best for your taste.. ◆
1 
2 |
3 |
4 |
The grill illustrated may have slight | 3 |
differences than the model purchased. |
|
6 BURNER
SEAR METHOD
Food is placed in the area of intense heat between the lit burners..
1
30
