ASSEMBLY
Make Assembly Easier for Yourself
Everything in this manual is designed to |
|
ensure that the weight system can be assem- |
|
bled successfully by anyone. | Before begin- |
ning assembly, make sure to read the |
|
information on this page. This brief intro- | |
duction will save you much more time than | |
it takes to read it. |
|
Assembly Requires Two Persons
For your convenience and safety, assemble the weight system with the help of another person.
Set Aside Enough Time
Due to the many features of the weight system, the assembly process will require about six hours. By setting aside plenty of time and by deciding to make the task enjoyable, assembly will go smoothly. You may want to assemble the weight system over
a couple of evenings.
Select a Location for the Weight System
Because of its weight and size, the weight system should be assembled in the location where it will be used. Make sure that there is enough room to walk around the weight system as you assemble it.
How to Unpack the Box
To make assembly as easy as possible, we have |
| |
divided the assembly process into four stages. The |
| |
parts needed for each stage are found in individual |
| |
bags. | Important: Wait until you begin each stage |
|
to open the parts bag for that stage. | Place all | |
parts of the weight system in a cleared area and |
| |
remove the packing materials. Do not dispose of |
| |
the packing materials until assembly is completed. |
| |
Make sure you have the following tools:
• Two adjustable wrenches
• One standard screwdriver
• One phillips screwdriver
• One rubber mallet
•You will also need grease or petroleum jelly, a small amount of soapy water, and clear tape or masking tape.
Note: Assembly will be more convenient if you have a socket set, a set of
How to Identify Parts
To help you identify the small parts used in assembly, we have included a PART IDENTIFICATION CHART
in the center of this manual. Place the chart on the floor and use it to easily identify parts during each
assembly step. Note: Some small parts may have been
How to Orient Parts
As you assemble the weight system, make sure that all parts are oriented exactly as shown in the draw- ings.
Tightening Parts
Tighten all parts as you assemble them, unless instructed to do otherwise.
Questions?
If you have questions after reading the assembly instructions, please call our Customer Service
Department at
The Four Stages of the Assembly Process
Frame Assembly— | You will begin by assembling | Cable Assembly | |
the base and the uprights that form the skeleton of | attach the cables and pulleys that connect the | ||
the weight system. |
| arms to the weights. |
|
Arm Assembly— | During this stage you will | Seat Assembly— | During the final stage you will |
assemble the arms and the leg lever. | assemble the seats and the backrests. | ||
|
|
|
|
5
