Wherify Wireless G550, G500 Series manual Set Time, Set Date

G500Series UG_R5.qxd 7/18/06 1:54 PM Page 27

Set Time

When setting time, you must individually set each digit of the hour, minute and second. To Set Time, select this menu icon from the Device Setup Menu. Then select either a 12-hour, or a 24-hour clock by highlighting your preference, and press the menu/OK button.

Use the scroll buttons, Phone Book and SOS, or “+” and “-” to choose the correct number of 0 to 9. Press the menu/OK key to set each desired time digit entry. Once you have set a part of the time entry, you will be prompted to the next digit of the time-set entry. If you make a mistake, you can press the Power Off/End button to go back to the previous digit. If the time is set for the 12-hour mode, you will be prompted to set either AM or PM when you have entered the last digit. Press and hold menu/OK button for 4 seconds after you are done to go back to the main menu.

Use the same procedure to set the time for a 24-hour time clock. You will not have to select AM or PM.

There is no error checking as single digits are entered, but your Wherifone will not accept an invalid time setting, such as 88:95:00.

Set Date

To Set the Date, select this menu icon from the Device Setup Menu. You will then be able to set the date displayed on your Wherifone.

The screen will display the initial date setting with the number “0” under the first Y in the YY column (Year), with no numbers under the MM (Month) and DD (Day) columns.

27