Wherify Wireless G550, G500 Series manual Plug your charger or hands- free headset in here

G500Series UG_R5.qxd 7/18/06 1:54 PM Page 31

Book. For the speed dial buttons, press the button once to display

a pre-programmed phone number, then press the menu/OK button to dial that number. Or you can press and hold a numbered button for four (4) seconds to dial the selected number. To make a phone call using a number in the Phone Book, press the Phone Book button, and scroll left or right using the keypad to find the desired number. Then press the Menu/OK button to dial that number.

To end a phone call, press the Power Off/End button in the middle of the dial pad. Please note that if you press and hold the Power Off/End button down for more than five seconds the phone will turn off.

To use a headset with your Wherifone, simply plug the headset connector into the Charger/Headset port located on the bottom of the Wherifone. Then insert the headset bud into your ear. Please note that you should only use a headset intended for use with the Wherifone as you may damage your Wherifone if you try to use a non-Wherifone headset.

Menu/OK Button: Press this button to answer an incoming call.

Programmable Buttons: Press any of the numbered buttons to dial a pre- programmed phone number.

Adapter Port:

Plug your charger or hands- free headset in here.

Volume Control: Press either of these buttons to control volume. Press (+) to increase volume or (-) to decrease volume.

Figure 1.7 31