5 SEC

Command pads

The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press START/ENTER for an oven function.

Using the control lock

The control lock prevents unwanted use of the oven by disabling most of the control panel command pads (except CLOCK and TIMER SET/OFF).

NOTES:

Control lock is only available when oven is not in use or control has not been set.

Set control lock when cleaning the control panel to prevent oven from accidentally turning on.

USING YOUR RANGE

To lock or deactivate the control panel:

Press and hold START/ENTER for 5 seconds. A single tone will sound

START and “Loc” and will appear on the

ENTER

temperature display. When the

 

5 SEC

control is locked, “START?” will

 

appear on the display if you press any

command pad.

To unlock the control panel: Press and hold START/ENTER for 5

seconds. A single tone will sound START and “Loc” and will disappear from

ENTER

the temperature display.

5 SEC

 

Starting a function

After programming a function, you must press START/ENTER to start the

START function. If you do not press

ENTER

START/ENTER within 5 seconds

of programming, “START?” will show on the display as a reminder. The control will return to time of day mode after 5 minutes if START/ENTER is not pressed.

Canceling a function

OFF/CANCEL will cancel any function except for the Clock and Timer Set

OFF functions. When you press CANCEL OFF/CANCEL, the display will

show the time of day or, if Minute Timer is also being used, the time remain- ing. To cancel the Minute Timer, see “Using the electronic Minute Timer” section.

NOTE: You may hear a fan blowing in

the oven even after you press OFF/CANCEL. This is the cooling fan. It will turn off when the oven cools down.

15

Page 15
Image 15
Whirlpool RS696PXG, RS675PXG warranty Starting a function, Canceling a function, Command pads, Using the control lock