Home Canning

When canning for long periods, alternate the use of surface cooking areas, elements or surface burners between batches. This allows time for the most recently used areas to cool.

Center the canner on the grate or largest surface cooking area or element. Canners should not extend more than 1 in. (2.5 cm) outside the cooking area.

Do not place canner on two surface cooking areas, elements or surface burners at the same time.

On ceramic glass models, only use flat-bottomed canners.

On coil element models, the installation of a Canning Unit Kit is recommended. If not installed, the life of the coil element will be shortened. See “Assistance or Service” for ordering instructions.

For more information, contact your local U.S. Government Agricultural Department Extension Office. In Canada, contact Agriculture Canada. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Never leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well- fitting lid and the material should be of medium-to-heavy thickness.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A non-stick finish has the same characteristics as its base material. For example, aluminum cookware with a non-stick finish will take on the properties of aluminum.

Use the following chart as a guide for cookware material characteristics.

COOKWARE

CHARACTERISTICS

 

 

*Aluminum

Heats quickly and evenly.

 

Suitable for all types of cooking.

 

Medium or heavy thickness is best for

 

 

most cooking tasks.

 

 

Cast iron

Heats slowly and evenly.

 

Good for browning and frying.

 

Maintains heat for slow cooking.

 

Rough surfaces may scratch cooktop.

 

 

 

Ceramic or

Follow manufacturer’s instructions.

Ceramic glass

Rough surfaces may scratch cooktop.

 

 

Heats slowly, but unevenly.

 

Ideal results on low to medium heat

 

 

settings.

 

 

*Copper

Heats very quickly and evenly.

 

 

 

Earthenware

Follow manufacturer’s instructions.

 

Use on low heat settings.

 

 

Porcelain

See stainless steel or cast iron.

enamel-on-

 

 

steel or cast

 

 

iron

 

 

 

 

Stainless steel

Heats quickly, but unevenly.

 

A core or base of aluminum or copper

on stainless steel provides even heating.

*Aluminum and copper may be used as a core or base in cookware. When used as a base it can leave permanent marks on the cooktop or grates.

8

Page 8
Image 8
Whirlpool YSF315PEK, SF325LEK manual Home Canning, Cookware Characteristics