3.5.1 Connect Satellite Interface to Primary DirecTV HD Receiver Each DirecTV HD Receiver requires the 110°W HD Converter.
Be sure you have at least 1 converter before you proceed.
Using a mini coax cable provided with the HD Converter, connect “Sat Re- ceiver Out” on the Interface to “To Interface/Dish” on the HD Converter.
Using the other mini coax cable provided with the HD converter, connect “HD CTRL 1” on the Interface to “To Control” on the HD Converter.
Using the mini coax cable provide with the Satellite Interface, connect “To Receiver” on the HD converter to “Satellite In” on the DirecTV HD Receiver.
See Figure 3.7. See Appendix A for a complete wiring diagram.
Figure 3.7
DC IN | DC OUT | COMM. OUT 1 | HD | |
TO SAT | TO SAT. | |||
| ||||
| ANTENNA | ANTENNA | CTRL 2 | |
| BLK/RED |
|
|
|
|
|
|
HD | FACTORY | SAT. | SAT. |
CTRL 1 | USE | RECEIVER | ANTENNA |
| ONLY | OUT | IN |
|
|
Satellite Interface
TO INTERFACE/DISH TO CONTROL
HD Converter
| (110°) HD CONVERTER | ||
| MODEL | ||
WINEGARD COMPANY • BURLINGTON, IOWA | |||
Made in USA | TO RECEIVER | ||
|
|
|
|
Primary DirecTV
HD Receiver
SATELLITE IN
If installing a secondary HD receiver, repeat 3.5.1, but connect coax cable from Satellite Antenna to “To Interface/Dish” on second HD Converter. Connect “HD CTRL 2” on the Interface to “To Control” on Converter. Connect “To Receiver” on Converter to “Satellite In” on second HD Receiver.
See Appendix A for a complete wiring diagram.
A secondary stand- ard DirecTV receiver does not require a second HD Converter.
10
