FG_FoodProc Manual2 7/7/06 3:54 PM Page 13
Before Your First Use
Prior to using your Food Processor, wash all parts as outlined in the section “Care and Cleaning.”
Assembling Your
Food Processor
Assembling Your Attachments
Warning: Use caution, as blades are extremely sharp. Always handle all blades by their central plastic section. Never grasp the cutting blade itself.
Note: All attachments must be firmly attached to the Spindle. Always adjust the attachments until you are sure that they are correctly fitted.
Universal “S” Blade (see figure 4)
figure 1
Before you assemble the food processor, ensure that the power cord is unplugged.
1Place the motor base facing you on a dry, level surface.
2Place the processing bowl onto the motor base, the bowl will only sit correctly on the base when the handle is at the 3 o’clock position, see figure 1.
3 Rotate the handle clockwise to lock, as indicated by the graphics on the left side of the motor base. The bowl handle should be at the 6 o’clock position, see figure 2.
4 Position the lid onto the processing bowl. You will notice an arrow on the lid in front of the feed tube. When placing the lid onto the bowl this arrow needs to align with the arrow on the handle of the bowl. To lock, turn the lid clockwise, as indicated by the graphics on the top of the handle, until it
1Place the processor bowl on the motor base as indicated in figures 1 and 2.
2Fit the
and press firmly into place. It may be necessary to turn the blade slightly left or right in order to fit the blade properly onto the shaft.
4Place ingredients into the processing bowl.
5Fit the processing cover to the processing bowl (see figure 3), and place the food pusher in the feed tube.
6Plug the power cord into a 120V AC power outlet.
7Start processing using the On/Off or Pulse buttons.
figure 2 | snaps into place. See figure 3. |
|
figure 3
8 When processing is complete, remove the |
Spindle and blade from the processing |
bowl before removing the processed food. |
figure 4
11 | 12 |
