FG_FoodProc Manual2 7/7/06 3:54 PM Page 15
Assembling Your Attachments
continued
Reversible Grating, Shaving
and Shredding Blades
1Place the processor bowl on the motor base as indicated in figures 1 and 2.
2Select the ‘Reversible’ disc of your choice - Shredding (fine or coarse), Grating or Shaving, or the julienne disc and fit over the Spindle. See figure 5.
Warning: Use caution as the blades are sharp.
4Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed tube.
5Plug the power cord into a 120V AC power outlet.
6Start processing using the On/Off or Pulse buttons.
7When processing is complete, remove the disc and Spindle from the processing bowl before removing the processed food.
figure 5
Assembling Your Attachments
continued
Variable Slicing Blade
1Place the processor bowl on the motor base as indicated in figures 1 and 2.
2Fit the slicing disc over the Spindle, see figure 6.
Warning: Use caution as the blades are sharp.
3The Slicing blade will adjust from 0 - 7mm in thickness. To adjust the Slicing Blade, hold the blade by grasping the finger hole and turn the center Spindle to the desired thickness. See figure 2.
4Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed tube.
5Plug the power cord into 120V AC power outlet.
6Start processing using the On/Off or Pulse buttons.
When processing is complete, remove the disc and Spindle from the processing bowl before removing the processed food.
figure 6
13 | 14 |
