Wolfgang Puck WPMFP15 manual Using Your Food Processor, Storing Your Food Processor

FG_FoodProc Manual2 7/7/06 3:54 PM Page 17

Using Your Food Processor

Important: If the processing bowl and cover are not correctly assembled, the Food Processor will not function.

figure 7 figure 8

Food Processor will not function with	Food processor will only function when
cover tab in the above position	cover tab is locked over processing
(unlocked).	bowl handle as shown above (locked).

1Plug the power cord into a 120V AC power.

2Using the On/Off button on the control panel, press once to start processing. The Pulse function remains on as long as the Pulse button is pressed down. Further ingredients can also be added while processing by pouring through the feed tube once the food pusher has been removed.

3After you have completed processing, press the On/Off button to stop processing.

Note: For maximum control load the feed tube first before turning on your food processor. Always use the food pusher for more evenly processed foods and never use your fingers. Remove the inner clear plastic core from the Twin Food Pusher to add liquid ingredients or to process smaller batches of carrots, celery or other similar type food products.

See figure 5.

figure 9

Important: The Food Processor is fitted with a safety thermal cut-out device and will shut off in the event of overload. If this occurs, switch the appliance off and it will automatically reset when cool.

Storing Your Food Processor

	The Wolfgang Puck Food Processor was
	designed so that all attachments can be stored
	within the unit itself.
	Storage Drawer
	The Reversible Shredding Disc, Reversible
	Grating and Shaving Disc, Julienne Disc, and
figure 10a	Spatula are all stored in the storage drawer.
	The Spindle, Universal S-Blade, and Variable
	Slicing Disc are stored in the Processing Bowl.
	1	Remove the storage drawer from the base
		of the food processor.
	2	Place Spatula on bottom of storage
		drawer as indicated in figure 10a.
figure 10b	3	Place one of the Reversible Discs in
		storage drawer as indicated in figure 10b.
	4	Place the Julienne Disc in the storage
		drawer as indicated in figure 10c.
	5	Place the remaining Reversible Disc on top
		of the first reversible disc 10d.
figure 10c	6	Your food processor drawer is now

properly assembled.

figure 10d

15 16