Models | Woodstock W1724, W1723 instruction

MODELS

W1723 and W1724

15" PLANERS

INSTRUCTION MANUAL

Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@shopfox.biz

COPYRIGHT © NOVEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China

Image 1

Woodstock W1724, W1723 instruction manual Models

Contents

Models Page Contents Introduction Woodstock Service and SupportAbout Your New Planer Specifications Warranty and Returns Disconnect machine when cleaning, adjusting or servicing Safety First Safety Additional Safety Instructions for Planers 220V Operation ElectricalExtension Cords Grounding Box Contents AssemblyOverview Shop Preparation Cleaning Planer Handwheel Stand W1723To mount the handwheel and crank, do these steps To mount the extension rollers, do these steps Extension Rollers To assemble the knife setting jig, do these steps Knife Setting Jig W1723Spiral Knife Alignment Tool W1724 Planer Overview Adjustments To check the cutterhead-to-table alignment, do these steps Cutterhead Alignment Underside of planer table Adjustments Inspecting Knives W1723 Knife Replacement procedure Typical Shop FOX cutterhead Knife Replacement W1723 Gib bolt tightening sequence Spiral knife system Knife Replacement W1724 Twisting knife and aligning gib Feed Rollers Chip Breaker Chip breaker height adjustment Chip Deflector To adjust the chip deflector, do these stepsAnti-Kickback Pawls Roller Spring Tension To adjust the roller spring tension, do these steps Table Bed Rollers To adjust the table bed roller height, do these steps Operations Always Wear Safety Goggles When Operating This machineTest Run Feed Rate Operational Tips Only plane a clean workpiece Solutions Troubleshooting Planing Results Maintenance General Cleaning Gear box drain and fill plugs Lubrication Belt Tension To adjust the belts, do these steps Symptom Possible Cause Corrective Action Troubleshooting Machine Operation Planer Accessories Maintenance Maintenance Description Maintenance Long T Allen Wrench 4MM Maintenance Angle 191⁄2 Long W1723 and W1724 15 Planer Wiring Diagram Warranty Card BOX BELLINGHAM, WA