35
The W1218 Rotacator®makes a planer setup process easier and
more accurate for adjusting the table rollers, feed rollers, chip
breaker, and the pressure bar if equipped on your planer. This tool
is a rotating dial indicator on a magnetic base. Shown to the right,
this handy device measures table-to-cutterhead alignment and the
table roller height. The Rotacator®allows you to set your table
within 0.001" from being parallel with the cutterhead.
MAINTENANCE
PLANER PAL®Magnetic Planer Knife Setting Jigs.
Our patented
knife-setting system lets you set straight-type planer knives in perfect
alignment every time! You can shift nicked knives on 2
1
2
"– 4"
cutterheads to get a perfect cut with an accuracy of ±.002". Two jigs
are needed for 15"– 20" planers. Use the
STANDARD JIGS for Steel
Knives W1216 (Pair), or the CARBIDE JIGS for Steel or Carbide Knives
W1217 (Pair).
The SHOP FOX®Wood Rack System features interchangeable rack
bars and shelf brackets to create simple or elaborate wood racks.
24" and 48" rack bars can be joined together to provide 6 feet of
vertical storage capacity. Easily adjustable 12" and 18" shelf
brackets lock into the rack bars for a secure system. Weight
capacity is 300 lbs. for 12" brackets and 200 lbs. for 18" brackets
when wood rack bars are supported by the floor and weight is
evenly distributed. Assembly instructions included.
D2829 24" Wood
Rack Bars, D2830 48" Wood Rack Bars, D283112" Wood Rack Shelf
Brackets, and D2832 18" Wood Rack Shelf Brackets.