Woodstock W1754

-23-

W1754 20" Planer With Mobile Base

MAINTENANCE

Regular periodic maintenance on your SHOP FOX®

Model W1754 will ensure its optimum performance. Make

a habit of inspecting your machine each time you use it.

Check for the following conditions and repair or

replace when necessary:

• Loose mounting bolts.

• Worn switch.

• Worn or damaged cords.

• Damaged V-belt.

• Any other condition that could hamper the safe

operation of this machine.

General

Disconnect power to the machine when

performing maintenance, assembly or

adjustments. Failure to do this may

result in serious personal injury.

OFF

Cleaning

Vacuum excess wood chips and sawdust, and wipe off the

remaining dust with a dry cloth. Protect the unpainted

cast iron surfaces on the table by wiping the table clean

after every use. Keep tables rust-free with regular appli-

cations of quality metal protectants.

Maintenance Schedule

For optimum performance from your machine, follow this

maintenance schedule and refer to any specific instruc-

tions given in this section.

Daily Maintenance:

• Clean the unpainted cast iron part of the table

• Lubricate feed rollers (see Page 25)

Monthly Maintenance:

• Inspect V-belt tension, damage, or wear (see Page

24)

• Lubricate four columns (see Page 25)

• Clean/vacuum dust buildup from inside cabinet and

off motor

• Lubricate worm gear (see Page 25)

• Lubricate drive chain (see Page 25)

Yearly Maintenance:

• Change gear box oil (see Page 25)