Woodstock W1770 manual General, Basic Controls, Control Panel

W1770 21" Bandsaw w/Foot Brake

OPERATIONS

General

This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly.

The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine. If at any time you are experiencing difficulties performing any operation, stop using the machine!

If you are an inexperienced operator, we strongly rec- ommend that you read books or trade articles, or seek training from an experienced bandsaw operator before performing any unfamiliar operations. Above all, your safety should come first!

READ and understand this entire instruc- tion manual before using this machine. Serious personal injury may occur if safety and operational information is not understood and followed. DO NOT risk your safety by not reading!

Basic Controls

Refer to Figures 45–47and the desriptions below to become familiar with the basic controls and components of your bandsaw.

Control Panel

Power Switch: Disables the ON and OFF button when the key is turned to the "0" position. Enables ON and OFF but- ton when the key is turned to "1" position.

ON Button: Starts motor only if the OFF button is popped out and power switch key is turn to "1" position.

OFF Button: Disables the ON button. Enable the ON but- ton by twisting the OFF button until it pops out.

Key

Power Switch

On Button

Off Button

Figure 45. W1770 control panel features.

OPERATIONS

-31-