2 Using SetIP (Phaser 3250DN only)

Installing SetIP

Using SetIP

Installing SetIP

1Make sure that the printer is connected to your computer and powered on.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

If you use Windows Vista, click Start All programs Accessories Run, and type X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.

3Click Install SetIP Utility(Optional).

4Click Next.

5Click Next.

6Click Finish.

Using SetIP

1From the Windows Start menu, select Programs or All Programs Æ Xerox Phaser 3250 Æ SetIP Æ SetIP.

The program automatically detects and displays new and configured print servers on your network.

11

Using SetIP (Phaser 3250DN only)

Page 63
Image 63
Xerox manual Using SetIP Phaser 3250DN only, Installing SetIP Using SetIP, Click Install SetIP UtilityOptional