Custom Installation | Xerox 3250 specification

NOTE: If your printer is not already connected to the computer, the following window will appear.

•After connecting the printer, click Next.

•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

•The installation window that appears in this User Guide may differ depending on the printer and interface in use.

5After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.

Otherwise, just click Next and skip to step 7.

6If the test page prints out correctly, click Yes. If not, click No to reprint it.

7Click Finish.

NOTE: After setup is complete, if your printer driver does not work properly, check the printer and power cables to make sure they are connected properly, then reinstall the printer driver. See “Reinstalling Printer Software” on page 9.

Custom Installation

You can choose individual components to install.

1Make sure that the printer is connected to your computer and powered on.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

If you use Windows Vista, click Start → All programs → Accessories → Run, and type X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.

3Click Install Software.

4Select Custom installation. Click Next.

5

Installing Printer Software in Windows

Image 57

Xerox 3250 manual Custom Installation

Contents

User Guide Page Contents Maintenance Ordering supplies and accessoriesTroubleshooting Installing additional memory Safety Disconnect Device Electrical SupplyDo These Do Not Do These Maintenance Information Product Safety CertificationRegulatory Information Energy program compliance Product Recycling & DisposalEH&S Contact Information Contact Information Introduction Special features Printer overview Features Phaser 3250D Phaser 3250DNFront view Guides Understanding the LEDs Control panel overviewRear view Status Description Finding more information Setting up the hardware Click Printer Setting Altitude adjustment Click Printer Setting Click Emulation Changing the font setting Using toner save mode Basic setupPrinting a demo Using toner save mode Printing a demo Printer driver features Software overviewSupplied software Windows System requirementsLinux Macintosh Using SetIP program 4Network setup Phaser 3250DN onlySupported operating systems Double click Application SetIP Network setup Phaser 3250DN only Loading print media Selecting print mediaSelecting print media Loading paper Output tray information Supported sizes of paper Type Size Dimensions Weighta Capacityb Guidelines for selecting and storing print media Media sizes supported in each modeGuidelines for special print media Type Guidelines Loading paper Changing the size of the paper in tray Using tray 1 or the optional tray Load the paper with the side to be printed on facing up Using the manual feeder Output tray information Printing a document Canceling a print job Canceling a print jobBasic printing Printing a document Accessories Ordering supplies and accessoriesHow to purchase Print cartridge Cleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printer Redistributing toner in the print cartridge Maintaining the print cartridgePrint cartridge storage Expected cartridge life Replacing the print cartridge Printing a configuration Maintenance partsItems Yield Average Clearing paper jams TroubleshootingPaper feed area Tray Areas near the print cartridge Manual trayPull the paper straight up and out Paper exit area Duplex unit areaDuplex jam Tips for avoiding paper jams Solving general printing problems Troubleshooting checklist Dpi Normal. See Dpi Best, change it to Solving print quality problems Gray Condition Suggested solutions Vertical linesBackground Toner smear Common Windows problems Common Linux problems Common PostScript problems Common Macintosh problems Precautions to take when installing memory Installing additional memoryInstalling a memory module Disconnect the power cord Activating the added memory in the PS printer properties Specifications Printer specificationsSpecifications and description ADF Glossary FDI Jbig Pstn Index Software Section Contents Using Windows PostScript Driver Using Your Printer in Linux Installing Printer Software in Windows Installing Printer SoftwareInstalling Software for Local Printing Custom Installation Installing Software for Network Printing Typical InstallationBefore you begin Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer Software Installing SetIP Using SetIP Phaser 3250DN onlyUsing SetIP Installing SetIP Using SetIP Will be printed after the Configuration Printing a Document Basic Printing Printer Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Paper Tab Layout Tab Graphics Tab Advanced Options Extras TabWatermark Overlay Using a Favorite Setting Troubleshooting TabUsing Help Printer Tab Printing Multiple Pages on One Sheet of Paper N-Up Printing Advanced Printing Printing Booklets Printing Posters Printing a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size None Using an Existing Watermark Using WatermarksCreating a Watermark Editing a Watermark What is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page Overlay Advanced Using Windows PostScript Driver Setting Up a Client Computer Setting Up a Host ComputerSharing the Printer Locally Check the Share this printer box Using Printer Settings Utility Using Utility ApplicationsOpening the Troubleshooting Guide Changing the Status Monitor Program Settings Installing the MFP Driver Using Your Printer in LinuxInstalling the MFP Driver Getting Started Click Uninstall Uninstalling the MFP Driver Opening the MFP Configurator Using the MFP ConfiguratorPrinters Configuration Printers Tab Classes Tab Ports Configuration Printing Files Printing from Applications Setting Up the Printer Installing Software Using Your Printer with a MacintoshPrinter driver For a Network-connected For a USB-connected Mac OS 10.3 or higher Xerox Phaser 3250DNMac OS 10.3 or higher Select your printer name Printing Changing Printer SettingsPrinting a Document Layout Printing Multiple Pages on One Sheet of Paper Printer Features Duplex Printing Index