Xerox G0561 manual Quick Scan to SMB Setup, Prerequisites for Scan to SMB Setup

Quick Scan to SMB Setup

Quick Scan to SMB Setup

Files can be scanned on the multifunction device and routed on to a server or a client using SMB protocol. Directory structures (repositories) need to be created on the server to hold the scanned documents.

See also:

System Administrator Guide: Contains detail concerning Scan to SMB setup.

User Guide: Contains information on how to set up templates and repositories.

Prerequisites for Scan to SMB Setup

1.Confirm that an existing operational network utilizing TCP/IP is available.

2.SMB Server exists and is running.

3.Repository (folder) needs to be created on the SMB server to hold the scanned document.

4.Confirm that the following ports are enabled:

a.TCP/IP Port

b.SMB Port

c.SNMP Port

d.SOAP Port

	Install
Data to Set Up Scan to SMB	Requirement	Comments
Server IP address	Required	This is the IP address of the SMB server.
Server Shared Name	Required	This is the name assigned to the shared folder on the
		SMB server.
Repository -- directory path,	Required	This is the location or path of the directory for saving
where the document will		scanned documents.
be stored on the SMB server
SMB Login/password	Optional	This is required, if the SMB server requires login/password
information		authentication. Most SMB servers require a login/password.
Kerberos IP Address	Optional	If Remote Authentication is required, then Kerberos needs to
		be enabled.

Xerox WorkCentre® Pro 123/128/133

10