Basic Setup, Overview Procedure | XiNCOM XC-DPG603 guide

XC-DPG603

Twin WAN DNS → IP

VPN Gateway

Chapter Contents

•Overview

•Procedure

1.Conﬁguring your LAN

2.Connecting Broadband Modems

3.Conﬁguring for Internet Access

4.Conﬁguring your LAN PCs

Chapter 2 - Basic Setup

Overview

Basic setup of your XC-DPG603 wil involve the following steps:

1.Connect the XC-DPG603 to one (1) PC and conﬁgure it to your existing LAN.

2.Connecting one or two Broadband Modems to your XC-DPG603.

3.Conﬁguring the XC-DPG603 for Interent Access.

4.Conﬁguring all PCs on your LAN to use the XC-DPG603.

Requirements:

•One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).

•Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.

•TCP/IP network protocol must be installed on all PCs.

CAT5 Ethernet Cables

Broadband Modems

TCP/IP Enabled PCs

9

Image 9

XiNCOM XC-DPG603 manual Basic Setup, Overview Procedure

Contents

Twin WAN DNS IP VPN Gateway Table of Contents QoS Conﬁguration VPN Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy Introduction Features Password Protected Conﬁguration Easy SetupHttp Firmware Upgrade and backup Dhcp Server Support System Physical Details LED Action Condition Default Settings Overview Procedure Basic Setup Configuring the XC-DPG603 for your LAN ProcedureNo Response? Configuring the XC-DPG603 for your LAN Installation Diagram for XC-DPG603 Connecting two broadband modems Settings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address Info TCP/IP Settings Configure PCs on your LANInternet Access Overview For Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommended Advanced Port Port Options Health Check Auto Dialup Bridge Mode Load Balance Settings Load Balance Advanced PPPoE Settings Advanced PPPoE Advanced Pptp Settings Advanced Pptp Advanced Setup Host IP Host IP Settings Virtual Server Virtual ServersVirtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server List Settings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNS For Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP Address Advanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG603 Using Remote Web-based Setup Firewall Exception Security Management Settings Block URL Access FilterSettings Access Filter Block URL Settings Session Limit Session Limit & Firewall ExceptionSession Limit QoS Conﬁguration How it works VPN Conﬁguration IPSec Global Setting IPSec Global Settings VPN Policy Setup Policy Setup Key Management DNS Conﬁguration XC-DPG602 & 603 Gateways How it works Domain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1 Record Map Host URLCname Record Host URL List Management Assistant System InformationTrap Targets Management Assistant Syslog ConﬁgurationMessage Status Using the Tftp Utility Recommended Updating the Firmware Backup your conﬁgurationTo save the XC-DPG603 Conﬁguration to a ﬁle Uploading the Firmware Http Upgrade FirmwareTo upload the ﬁrmware to the Gateway Restoring Saved Conﬁguration System Status Operation & Status Operation & Status Existing Dhcp Server Advanced LAN Conﬁguration Static Routing Advanced LAN Configuration 192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100 Operating Temperature DimensionsStorage Temperature External Power Adapter Checking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP Address Using a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings Windows Figure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XP Overview Troubleshooting